[ATrpms-users] Lirc Problems after upgrade to FC11

Paul mylists at wilsononline.id.au
Fri Jan 15 20:25:52 CET 2010


The modprobe settings have moved to /etc/modprobe.d so check that directory too.
eg local.conf you should migrate all your files inside this directory.

in my Fedora 12 upgrade the lircd socket address had changed to /var/run/lircd/lircd
but I'm not sure if this applies to F11

hope this helps..
Paul


On 15/01/2010 11:07 PM, Steven wrote:
> I have the old setup in /etc/modprobe.conf
>
> So far I think I tracked it down to this one problem.
>
> I see this in Dmesg and I cannot find any solution anywhere to it.
>
> lirc_dev: IR Remote Control driver registered, major 248
>
> tda18271: performing RF tracking filter calibration
>
> lirc_serial: auto-detected active high receiver
>
> lirc_dev: lirc_register_driver: sample_rate: 0
>
> fuse init (API version 7.11)
>
> lirc_i2c: chip 0x10020 found @ 0x18 (Hauppauge IR)
>
> lirc_i2c: ir_probe: ir_attach failed!
>
> I am not sure if the 248 means anything instead of 61 but I do not that the
>
> Ir_attach failed! Is defintally the reason my remote is not controlling
> anything.
>
> Irw sits there but no remote commands work.
>
> My homed serial blaster (change_chan.sh)
>
> So far seams to change channels however I did have to make it use lircd
> insead of lircd1 in order for it to work.
>
> Any help is greatly appricated.
>
> Steven.
>
> Oh ya running a PVR-350 trying to get the IR Working again J
>
> And using the serial blaster
>
> Here is my modprobe.conf just in case.
>
> #lirc module
>
> alias char-major-61-0 lirc_i2c
>
> alias char-major-61-1 lirc_serial
>
> options lirc_serial softcarrier=1 irq=3 io=0x2f8
>
> #######IR setup####
>
> install lirc_i2c /sbin/modprobe ivtv; /sbin/modprobe --ignore-install
> lirc_i2c
>
> install lirc_serial setserial /dev/ttyS1 uart none; /sbin/modprobe
> --ignore-install lirc_serial
>
> # nvidia kernel module
>
> alias char-major-195 nvidia-190_53
>
> alias nvidia nvidia-190_53
>
>
>
> _______________________________________________
> atrpms-users mailing list
> atrpms-users at atrpms.net
> http://lists.atrpms.net/mailman/listinfo/atrpms-users




More information about the atrpms-users mailing list