[ATrpms-users] 2.6.19-1.2288.2.4.fc5 - ivtv_fb version mismatch and problem using tvout/osd

[Walter Bleicher]

Hello 

I noticed a mismatch of modules for 2.6.19-1.2288.2.4.fc5 with ivtv 0.10.1

I installed the following packages from atrpms:

kernel-2.6.19-1.2288.2.4.fc5.i686
kernel-devel-2.6.19-1.2288.2.4.fc5.i586
video4linux-kmdl-2.6.19-1.2288.2.4.fc5-20070302-78.fc5.at.i686
ivtv-0.10.1-126.fc5.at.i386
ivtv-kmdl-2.6.19-1.2288.2.4.fc5-0.10.1-126.fc5.at.i686
ivtv-firmware-20070217-13.at.noarch


Using /lib/modules/2.6.19-1.2288.2.4.fc5/updates/drivers/media/video/ivtv/ivtv.ko
from the video4linux-kmdl-2.6.19-1.2288.2.4.fc5-20070302-78.fc5.at.i686
and ivtv_fb error messages:

ivtv:  ==================== START INIT IVTV ====================
ivtv:  version 1.0.0 (2.6.19-1.2288.2.4.fc5 mod_unload 686 REGPARM 4KSTACKS ) loading

ivtv_fb: disagrees about version of symbol ivtv_vapi_result
ivtv_fb: Unknown symbol ivtv_vapi_result
ivtv_fb: disagrees about version of symbol ivtv_udma_alloc
ivtv_fb: Unknown symbol ivtv_udma_alloc
ivtv_fb: disagrees about version of symbol ivtv_udma_unmap
ivtv_fb: Unknown symbol ivtv_udma_unmap
ivtv_fb: disagrees about version of symbol ivtv_vapi
ivtv_fb: Unknown symbol ivtv_vapi
ivtv_fb: disagrees about version of symbol ivtv_udma_prepare
ivtv_fb: Unknown symbol ivtv_udma_prepare
ivtv_fb: disagrees about version of symbol ivtv_cards
ivtv_fb: Unknown symbol ivtv_cards
ivtv_fb: disagrees about version of symbol ivtv_udma_setup
ivtv_fb: Unknown symbol ivtv_udma_setup


------------------- 
Using /lib/modules/2.6.19-1.2288.2.4.fc5/updates/drivers/media/video/ivtv.ko
from ivtv-kmdl-2.6.19-1.2288.2.4.fc5-0.10.1-126.fc5.at.i686
and ivtv_fb working

ivtv:  ==================== START INIT IVTV ====================
ivtv:  version 0.10.1 (tagged release) loading
ivtv:  Linux version: 2.6.19-1.2288.2.4.fc5 mod_unload 686 REGPARM 4KSTACKS

------------------- 
With the above configuration I see mythtv showing up, but the picture is gray and flickering with diagonal lines. The same when I playback a recording.
I tried changing the output with
/usr/bin/v4l2-ctl -d /dev/video0 -o 0
/usr/bin/v4l2-ctl -d /dev/video0 -o 1
/usr/bin/v4l2-ctl -d /dev/video0 -o 2

# modprobe -v saa7127 test_image=1 
produces also an unstable image.

I edited /etc/modprobe.conf (this setting I didn't need for 2.6.18-1.2257.fc5 ivtv0.8) described in a recent thread
install ivtv /sbin/modprobe saa7127; /sbin/modprobe --ignore-install ivtv; /sbin/modprobe ivtv-fb

I would appreciate any help solving this problem.

Thanks for your help
Hans

Please find attached the two complete dmesg outputs:

ivtv:  ==================== START INIT IVTV ====================
ivtv:  version 1.0.0 (2.6.19-1.2288.2.4.fc5 mod_unload 686 REGPARM 4KSTACKS ) loading
ivtv0: Autodetected Hauppauge card (cx23415 based)
ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 16 (level, low) -> IRQ 18
SCSI subsystem initialized
USB Universal Host Controller Interface driver v3.0
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
libata version 2.00 loaded.
ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02060039
ivtv0: Decoder revision: 0x02020023
tveeprom 2-0050: Hauppauge model 48139, rev K257, serial# 7805538
tveeprom 2-0050: tuner model is Philips FM1216 ME MK3 (idx 57, type 38)
tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74)
tveeprom 2-0050: audio processor is MSP4418 (idx 25)
tveeprom 2-0050: decoder processor is SAA7115 (idx 19)
tveeprom 2-0050: has radio, has IR receiver, has no IR transmitter
ivtv0: Autodetected Hauppauge WinTV PVR-350
tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #0)
tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
saa7115 2-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
saa7127 2-0044: saa7129 found @ 0x88 (ivtv i2c driver #0)
msp3400 2-0040: MSP4418G-B3 found @ 0x80 (ivtv i2c driver #0)
msp3400 2-0040: MSP4418G-B3 supports nicam and radio, mode is autodetect and autoselect
ivtv0: Registered device video0 for encoder MPEG (4 MB)
ivtv0: Registered device video32 for encoder YUV (2 MB)
ivtv0: Registered device vbi0 for encoder VBI (1 MB)
ivtv0: Registered device video24 for encoder PCM audio (1 MB)
ivtv0: Registered device radio0 for encoder radio
ivtv0: Registered device video16 for decoder MPEG (1 MB)
ivtv0: Registered device vbi8 for decoder VBI (1 MB)
ivtv0: Registered device vbi16 for decoder VOUT
ivtv0: Registered device video48 for decoder YUV (1 MB)
ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
tuner 2-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
ivtv0: Initialized Hauppauge WinTV PVR-350, card #0
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.5 to 64
ivtv:  ======================  NEXT CARD  ======================
ivtv1: Autodetected Hauppauge card (cx23416 based)
ACPI: PCI Interrupt 0000:06:08.0[A] -> GSI 21 (level, low) -> IRQ 20
intel8x0_measure_ac97_clock: measured 50889 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 18, io base 0x00002440
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 21, io base 0x00002460
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ivtv1: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv1: Encoder revision: 0x02060039
tuner 3-0043: chip found @ 0x86 (ivtv i2c driver #1)
tda9887 3-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 3-0060: TEA5767 detected.
tuner 3-0060: chip found @ 0xc0 (ivtv i2c driver #1)
tuner 3-0060: type set to 62 (Philips TEA5767HN FM Radio)
tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #1)
i2c_adapter i2c-3: Client creation failed at 0x44 (-1)
tveeprom 3-0050: Hauppauge model 23559, rev D591, serial# 8201932
tveeprom 3-0050: tuner model is Philips FQ1216AME MK4 (idx 91, type 56)
tveeprom 3-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74)
tveeprom 3-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62)
tveeprom 3-0050: audio processor is CX25843 (idx 37)
tveeprom 3-0050: decoder processor is CX25843 (idx 30)
tveeprom 3-0050: has radio, has no IR receiver, has no IR transmitter
ivtv1: Autodetected WinTV PVR 500 (unit #1)
cx25840 3-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1)
cx25840 3-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #1)
ivtv1: Registered device video1 for encoder MPEG (4 MB)
ivtv1: Registered device video33 for encoder YUV (2 MB)
ivtv1: Registered device vbi1 for encoder VBI (1 MB)
ivtv1: Registered device video25 for encoder PCM audio (1 MB)
ivtv1: Registered device radio1 for encoder radio
tuner 3-0061: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4))
ivtv1: Initialized WinTV PVR 500 (unit #1), card #1
ivtv:  ======================  NEXT CARD  ======================
ivtv2: Autodetected Hauppauge card (cx23416 based)
ACPI: PCI Interrupt 0000:06:09.0[A] -> GSI 22 (level, low) -> IRQ 22
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc480000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
ivtv2: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv2: Encoder revision: 0x02060039
tuner 4-0043: chip found @ 0x86 (ivtv i2c driver #2)
tda9887 4-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 4-0061: chip found @ 0xc2 (ivtv i2c driver #2)
i2c_adapter i2c-4: Client creation failed at 0x44 (-1)
cx25840 4-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #2)
cx25840 4-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
wm8775 4-001b: chip found @ 0x36 (ivtv i2c driver #2)
tveeprom 4-0050: Hauppauge model 23559, rev D591, serial# 8201932
tveeprom 4-0050: tuner model is Philips FQ1216AME MK4 (idx 91, type 56)
tveeprom 4-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74)
tveeprom 4-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62)
tveeprom 4-0050: audio processor is CX25843 (idx 37)
tveeprom 4-0050: decoder processor is CX25843 (idx 30)
tveeprom 4-0050: has radio, has no IR receiver, has no IR transmitter
ivtv2: Correcting tveeprom data: no radio present on second unit
ivtv2: Autodetected WinTV PVR 500 (unit #2)
ivtv2: Registered device video2 for encoder MPEG (4 MB)
ivtv2: Registered device video34 for encoder YUV (2 MB)
ivtv2: Registered device vbi2 for encoder VBI (1 MB)
ivtv2: Registered device video26 for encoder PCM audio (1 MB)
tuner 4-0061: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4))
ivtv2: Initialized WinTV PVR 500 (unit #2), card #2
ivtv:  ====================  END INIT IVTV  ====================
ivtv_fb: disagrees about version of symbol ivtv_vapi_result
ivtv_fb: Unknown symbol ivtv_vapi_result
ivtv_fb: disagrees about version of symbol ivtv_udma_alloc
ivtv_fb: Unknown symbol ivtv_udma_alloc
ivtv_fb: disagrees about version of symbol ivtv_udma_unmap
ivtv_fb: Unknown symbol ivtv_udma_unmap
ivtv_fb: disagrees about version of symbol ivtv_vapi
ivtv_fb: Unknown symbol ivtv_vapi
ivtv_fb: disagrees about version of symbol ivtv_udma_prepare
ivtv_fb: Unknown symbol ivtv_udma_prepare
ivtv_fb: disagrees about version of symbol ivtv_cards
ivtv_fb: Unknown symbol ivtv_cards
ivtv_fb: disagrees about version of symbol ivtv_udma_setup
ivtv_fb: Unknown symbol ivtv_udma_setup
lirc_dev: IR Remote Control driver registered, at major 61
bttv: driver version 0.9.17 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
cx2388x v4l2 driver version 0.0.6 loaded
lirc_i2c: chip found @ 0x18 (Hauppauge IR)
lirc_dev: lirc_register_plugin: sample_rate: 10


-------------------------------------------------------------------------------------
ivtv:  ==================== START INIT IVTV ====================
ivtv:  version 0.10.1 (tagged release) loading
ivtv:  Linux version: 2.6.19-1.2288.2.4.fc5 mod_unload 686 REGPARM 4KSTACKS
ivtv:  In case of problems please include the debug info between
ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
ivtv:  any module options, when mailing the ivtv-users mailinglist.
intel8x0_measure_ac97_clock: measured 50850 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 18 (level, low) -> IRQ 16
eth0: RealTek RTL8139 at 0xe01b4000, 00:40:f4:51:87:32, IRQ 16
eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
ACPI: PCI Interrupt 0000:05:08.0[A] -> GSI 20 (level, low) -> IRQ 18
USB Universal Host Controller Interface driver v3.0
e100: eth1: e100_probe: addr 0xfc500000, irq 18, MAC addr 00:0B:CD:BE:0E:BB
ivtv0: Autodetected Hauppauge card (cx23415 based)
ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 16 (level, low) -> IRQ 19
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfc480000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02060039
ivtv0: Decoder revision: 0x02020023
tveeprom 2-0050: Hauppauge model 48139, rev K257, serial# 7805538
tveeprom 2-0050: tuner model is Philips FM1216 ME MK3 (idx 57, type 38)
tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74)
tveeprom 2-0050: audio processor is MSP4418 (idx 25)
tveeprom 2-0050: decoder processor is SAA7115 (idx 19)
tveeprom 2-0050: has radio, has IR receiver, has no IR transmitter
ivtv0: Autodetected Hauppauge WinTV PVR-350
tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #0)
tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
saa7115 2-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
saa7127 2-0044: saa7129 found @ 0x88 (ivtv i2c driver #0)
msp3400 2-0040: MSP4418G-B3 found @ 0x80 (ivtv i2c driver #0)
msp3400 2-0040: MSP4418G-B3 supports nicam and radio, mode is autodetect and autoselect
ivtv0: Registered device video0 for encoder MPEG (4 MB)
ivtv0: Registered device video32 for encoder YUV (2 MB)
ivtv0: Registered device vbi0 for encoder VBI (1 MB)
ivtv0: Registered device video24 for encoder PCM audio (1 MB)
ivtv0: Registered device radio0 for encoder radio
ivtv0: Registered device video16 for decoder MPEG (1 MB)
ivtv0: Registered device vbi8 for decoder VBI (1 MB)
ivtv0: Registered device vbi16 for decoder VOUT
ivtv0: Registered device video48 for decoder YUV (1 MB)
ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
tuner 2-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
ivtv0: Initialized Hauppauge WinTV PVR-350, card #0
ivtv:  ======================  NEXT CARD  ======================
ivtv1: Autodetected Hauppauge card (cx23416 based)
ACPI: PCI Interrupt 0000:06:08.0[A] -> GSI 21 (level, low) -> IRQ 21
ivtv1: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv1: Encoder revision: 0x02060039
tuner 3-0043: chip found @ 0x86 (ivtv i2c driver #1)
tda9887 3-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 3-0060: TEA5767 detected.
tuner 3-0060: chip found @ 0xc0 (ivtv i2c driver #1)
tuner 3-0060: type set to 62 (Philips TEA5767HN FM Radio)
tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #1)
i2c_adapter i2c-3: Client creation failed at 0x44 (-1)
tveeprom 3-0050: Hauppauge model 23559, rev D591, serial# 8201932
tveeprom 3-0050: tuner model is Philips FQ1216AME MK4 (idx 91, type 56)
tveeprom 3-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74)
tveeprom 3-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62)
tveeprom 3-0050: audio processor is CX25843 (idx 37)
tveeprom 3-0050: decoder processor is CX25843 (idx 30)
tveeprom 3-0050: has radio, has no IR receiver, has no IR transmitter
ivtv1: Autodetected WinTV PVR 500 (unit #1)
cx25840 3-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1)
cx25840 3-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #1)
ivtv1: Registered device video1 for encoder MPEG (4 MB)
ivtv1: Registered device video33 for encoder YUV (2 MB)
ivtv1: Registered device vbi1 for encoder VBI (1 MB)
ivtv1: Registered device video25 for encoder PCM audio (1 MB)
ivtv1: Registered device radio1 for encoder radio
tuner 3-0061: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4))
ivtv1: Initialized WinTV PVR 500 (unit #1), card #1
ivtv:  ======================  NEXT CARD  ======================
ivtv2: Autodetected Hauppauge card (cx23416 based)
ACPI: PCI Interrupt 0000:06:09.0[A] -> GSI 22 (level, low) -> IRQ 22
ivtv2: loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv2: Encoder revision: 0x02060039
tuner 4-0043: chip found @ 0x86 (ivtv i2c driver #2)
tda9887 4-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 4-0061: chip found @ 0xc2 (ivtv i2c driver #2)
i2c_adapter i2c-4: Client creation failed at 0x44 (-1)
cx25840 4-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #2)
cx25840 4-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
wm8775 4-001b: chip found @ 0x36 (ivtv i2c driver #2)
tveeprom 4-0050: Hauppauge model 23559, rev D591, serial# 8201932
tveeprom 4-0050: tuner model is Philips FQ1216AME MK4 (idx 91, type 56)
tveeprom 4-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74)
tveeprom 4-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62)
tveeprom 4-0050: audio processor is CX25843 (idx 37)
tveeprom 4-0050: decoder processor is CX25843 (idx 30)
tveeprom 4-0050: has radio, has no IR receiver, has no IR transmitter
ivtv2: Correcting tveeprom data: no radio present on second unit
ivtv2: Autodetected WinTV PVR 500 (unit #2)
ivtv2: Registered device video2 for encoder MPEG (4 MB)
ivtv2: Registered device video34 for encoder YUV (2 MB)
ivtv2: Registered device vbi2 for encoder VBI (1 MB)
ivtv2: Registered device video26 for encoder PCM audio (1 MB)
tuner 4-0061: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4))
ivtv2: Initialized WinTV PVR 500 (unit #2), card #2
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 19, io base 0x00002440
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ivtv:  ====================  END INIT IVTV  ====================
ivtv0-fb: Framebuffer at 0xed510000, mapped to 0xe1010000, size 1665k
ivtv0-fb: === Validated display mode  ===
ivtv0-fb: Display size 720x576 (720x576 Virtual) @ 32bpp
ivtv0-fb: Display position 1,1
ivtv0-fb: Display filter : on
ivtv0-fb: Color space : RGB
Console: switching to colour frame buffer device 90x36
ivtv0-fb: === Display mode change ===
ivtv0-fb: Display size 720x576 (720x576 Virtual) @ 32bpp
ivtv0-fb: Display position 1,1
ivtv0-fb: Display filter : on
ivtv0-fb: Color space : RGB
ivtv0-fb: Running in compatibility mode. Display resize & mode change disabled
ivtv0-fb: Framebuffer registered on ivtv card id 0
lirc_dev: IR Remote Control driver registered, at major 61
bttv: driver version 0.9.17 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
cx2388x v4l2 driver version 0.0.6 loaded
lirc_i2c: chip found @ 0x18 (Hauppauge IR)
lirc_dev: lirc_register_plugin: sample_rate: 10
ivtv0-fb: === Validated display mode  ===
ivtv0-fb: Display size 720x576 (720x576 Virtual) @ 32bpp
ivtv0-fb: Display position 1,1
ivtv0-fb: Display filter : on
ivtv0-fb: Color space : RGB
ivtv0-fb: === Display mode change ===
ivtv0-fb: Display size 720x576 (720x576 Virtual) @ 32bpp
ivtv0-fb: Display position 1,1
ivtv0-fb: Display filter : on
ivtv0-fb: Color space : RGB
ivtv0-fb: === Validated display mode  ===
ivtv0-fb: Display size 720x576 (720x576 Virtual) @ 32bpp
ivtv0-fb: Display position 1,1
ivtv0-fb: Display filter : on
ivtv0-fb: Color space : RGB
ivtv0-fb: === Validated display mode  ===
ivtv0-fb: Display size 720x576 (720x576 Virtual) @ 32bpp
ivtv0-fb: Display position 1,1
ivtv0-fb: Display filter : on
ivtv0-fb: Color space : RGB
ivtv0-fb: === Display mode change ===
ivtv0-fb: Display size 720x576 (720x576 Virtual) @ 32bpp
ivtv0-fb: Display position 1,1
ivtv0-fb: Display filter : on
ivtv0-fb: Color space : RGB
ivtv0: Stereo mode changed