[ATrpms-users] Nvidia Legacy

[Paulo Cavalcanti]

On 1/1/07, Fedor Pikus <fpikus at gmail.com> wrote:
>
> On 1/1/07, Paulo Cavalcanti <promac at gmail.com> wrote:
> >
> >
> > On 1/1/07, Fedor Pikus <fpikus at gmail.com> wrote:
> > > I took the group's advice and upgraded one of my FC4 systems to FC6
> > > using DVD and then smart. Most of the packages eventually upgraded,
> > > but few problems remain.
> > >
> > > The worst one is the NVidia drivers. The system has an old card
> > > supported by Legacy drivers. No problem, ATRpms has nvidia-legacy RPM.
>
> > > Which depends on nvidia-graphics7184. Which needs a kmdl package.
> > > Which does not exist for any of FC6 kernels.
> >
> > The 8776 kmdls are still here:
> >
> > http://dl.atrpms.net/fc6-i386/atrpms/stable/
>
> Thanks, they seem to work even though they are not "legacy". The error
> message from trying to install the latest NVIDIA module implies that
> there is a separate line of "legacy" drivers, which is why I went
> after "nvidia-legacy".


Series 97xx does not work for GForce 4 and below. They say to use 96xx,
instead. I think this is what they call legacy now.


>
> > For the 7184, it is just a question of recreating the kmdls you need.
> Are
> > you using a TNT2?
>
> Yes. Still, it seems like nvidia-legacy in ATRPMS-FC6 cannot be
> installed in any configuration at the moment, perhaps it should be
> removed to avoid confusion?


I do not know. I have never used them.


>
> > > In general, seems like not all repositories caught up with FC6. After
> > > several packages did not upgrade, I did a search on pbone.net and
> > > found that acroread, xosview, and alsaplayer exist in various
> > > repositories which haven't moved to FC6 yet. Seems like there is a
> > > "timing gap" where some repositories are dropping support for FC4 and
> > > older and other are not moving beyond FC4 or FC5.
> >
> >
> > The fix for acroread is simple. I posted it sometime ago, when FC6 was
> > released.
>
> Found it, thanks. I didn't even get to that, there are no acroread
> RPMs for FC6 as far as I could find. I can install from Adobe's
> installer, sure, but I liked being aboe to fetch it with apt or smart
> along with other packages.


I use the rpm (generic) from Adobe site:

http://ardownload.adobe.com/pub/adobe/reader/unix/7x/7.0.8/enu/AdobeReader_enu-7.0.8-1.i386.rpm

Dag has another one I have never tried:

http://dag.wieers.com/packages/acroread/acroread-7.0.8-1.rf.nosrc.rpm

But you have to apply the fix after installing it.


> Alsaplayer is completely deprecated, as far as I know.
> >
> > The only problems I had with FC6 until now stems from xorg 7.1
> > But if it works for you, then you asre all set.
>
> Works so far. But I haven't tried to restore support for my Wacom
> tablet yet, after the upgrade even udev rules don't work anymore.
>
>
Then your problems should be over, hopefully.

-- 
Paulo Roma Cavalcanti
LCG - UFRJ
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.atrpms.net/pipermail/atrpms-users/attachments/20070101/29bebb47/attachment.html