[ATrpms-users] ivtv-kmdl: strange picture with TV-out on PVR-350

[Jurgen Goedbloed]

Hi,

For a while I use atrpms to manage mythtv and the drivers for my PVR-350
card.
Since I updated to ivtv kmdl driver 0.10.1, TV out on my PVR-350 card is
not working anymore.

When I load the ivtv kernel module, I get a strange picture on my TV, a
grey screen with some diagonal lines. Playing back an mpeg file (cat
test.mpg > /dev/video16) seems to work, but the picture is garbled. Card
must be OK, when I try the 0.10.1 driver and do the cat test.mpg >
/dev/video16 I get a good picture.

I am currently using the 0.9.1 ivtv kernel module, because with 0.10.1 I
cannot even load the ivtv-fb driver (unknown symbols), which is necessary
for mythtv.

Here's the output of the ivtv driver:

ivtv:  ==================== START INIT IVTV ====================
ivtv:  version 0.9.1 (tagged release) loading
ivtv:  Linux version: 2.6.19-1.2288.fc5smp SMP mod_unload 686 REGPARM
4KSTACKS
ivtv:  In case of problems please include the debug info between
ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
ivtv:  any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge card (cx23415 based)
ACPI: PCI Interrupt 0000:05:03.0[A] -> GSI 16 (level, low) -> IRQ 16
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
saa7115 1-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
msp3400 1-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0)
msp3400 1-0040: MSP4418G-A2 supports nicam and radio, mode is autodetect
and autoselect
i2c_adapter i2c-1: Client creation failed at 0x44 (-1)
lirc_i2c: chip found @ 0x18 (Hauppauge IR)
lirc_dev: lirc_register_plugin: sample_rate: 10
saa7127 1-0044: saa7127 found @ 0x88 (ivtv i2c driver #0)
tveeprom 1-0050: Hauppauge model 48134, rev J347, serial# 7013431
tveeprom 1-0050: tuner model is LG TP18PSB01D (idx 47, type 28)
tveeprom 1-0050: TV standards PAL(B/G) (eeprom 0x04)
tveeprom 1-0050: audio processor is MSP4418 (idx 25)
tveeprom 1-0050: decoder processor is SAA7115 (idx 19)
tveeprom 1-0050: has radio, has IR receiver, has no IR transmitter
ivtv0: Autodetected Hauppauge WinTV PVR-350
ivtv0: Encoder revision: 0x02060039
ivtv0 warning: Encoder Firmware can be buggy, use version 0x02040011,
0x02040024 or 0x02050032.
ivtv0: Decoder revision: 0x02020023
ivtv0: Registered device video0 for encoder MPEG
ivtv0: Registered device video32 for encoder YUV
ivtv0: Registered device vbi0 for encoder VBI
ivtv0: Registered device video24 for encoder PCM audio
ivtv0: Registered device radio0 for encoder radio
ivtv0: Registered device video16 for decoder MPEG
ivtv0: Registered device vbi8 for decoder VBI
ivtv0: Registered device vbi16 for decoder VOUT
ivtv0: Registered device video48 for decoder YUV
ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
tuner 1-0061: type set to 28 (LG PAL_BG+FM (TPI8PSB01D))
ivtv0: Initialized Hauppauge WinTV PVR-350, card #0
ivtv:  ====================  END INIT IVTV  ====================

Versions:

ivtv_xdriver-0.10.7-8_r3843.fc5.at
ivtv-0.10.1-126.fc5.at
perl-Video-ivtv-0.13-8.fc5.at
ivtv-firmware-20070217-13.at
ivtv-kmdl-2.6.19-1.2288.fc5smp-0.9.1-123.fc5.at
kernel-smp-2.6.19-1.2288.fc5
video4linux-kmdl-2.6.19-1.2288.fc5smp-20070302-78.fc5.at

Hope anyone can help. It used to work very well.

Best regards,
Jurgen Goedbloed.