[ATrpms-users] mythtv-suite ruins my ivtv configuration

Anders Hedegård anhe85 at gmail.com
Fri Sep 29 09:46:01 CEST 2006


On 9/29/06, Axel Thimm <Axel.Thimm at atrpms.net> wrote:
>
> Hi,
>
> On Fri, Sep 29, 2006 at 08:24:40AM +0200, Anders Hedegård wrote:
> > So ive been trying everything...
> >
> > Installed ivtv for my PVR-150 tuesday, everything working lige a charme.
> >
> > my kernel:
> > 2.6.17-1.2187_FC5smp
> >
> > so I installed ivtv from ATrpms, using yum
> >
> > yum install ivtv-firmware ivtv-firmware-audio
> > yum install ivtv-kmdl-$(uname -r)
> > (ivtv is here installed as a depencie)
> >
> > Set up my modprobe.conf with following:
> > # ivtv modules setup
> > alias char-major-81 videodev
> > alias char-major-81-0 ivtv
> > options ivtv tda9887=0
> >
> > tested it in mplayer (playing directly from /dev/video0) and everything
> > worked. I could initialize the card proberly, I had sound etc.
> >
> > Then I installed mythtv-suite from ATrpms, and when i now try to
> initialise
> > ivtv I get an error. It all of a sudden can't recognize tda9887 as a
> command
> > from my options line.
>
> You probably also upgraded ivtv to 0.7.1. mythtv itself would not be
> able to manipulate any driver/modprobe configs. Unless you mean that
> mythtv initialized the card in such a way that you cannot reinitialize
> anymore. You can check by either rmmoding th driver or rebooting the
> system.


mythtv isn't running.
I installed ivtv as described above, and then used yum install mythtv-suite.
That is all, after a reboot (stille mythtv is not running, as mysql or
mythtvsetup has been run yet) when i try to

# /sbin/depmod -a
# /sbin/modprobe ivtv

i can in /var/log/messages read that tda9887 is an unknown command.

> If I remove the options line from modprobe, then I can initialise the
> card,
> > but there is no sound.
> >
> > There is a picture from the card, but no sound.
> >
> > Are there anyone out there who have experienced this?
> >
> > Thank you in advance...
>
> You should isolate whether the issue is ivtv or mythtv, e.g. reboot
> and check w/o using mythtv whether the card works. If then mythtv
> breaks it report to mythtv lists. If it is broken by the upgrade to
> ivtv 0.7.1 report to ivtv.
> --
> Axel.Thimm at ATrpms.net


Wouldn't this seem like a ivtv problem, caused by something in a mythtv rpm?





-- 
Anders Hedegård
anhe85 at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.atrpms.net/pipermail/atrpms-users/attachments/20060929/d053ef11/attachment.html 


More information about the atrpms-users mailing list