[ATrpms-users] Gigabyte Nforc3 + x86_64 + PVR150 + FC6 no worky

[Axel Thimm]

On Tue, Nov 21, 2006 at 12:25:15PM -0800, cromworshipper-atrpms at yahoo.com wrote:
> I had a MythTV setup working well with FC4 i386.  I did a clean install of
> FC6 x86_64 which went reasonably well, but with one major problem.  I'm using
> the atrpms repository for nvidia driver, ivtv driver, and mythtv.
> 
> The recorded video plays fine for a few seconds and then flickers or tears
> very badly.  It's different for different channels, some play with only a bit
> of tearing/flickering while others are much worse.  
> 
> I've turned of APIC.  I've looked at the verbose IVTV output. I don't
> understand /proc/interrupts so I've pasted it below.  
> 
> What could it possibly be?  This exact same setup worked very well with FC4
> i386, and I kept it up to date with yum.  If I can't figure this out, I'll
> have to try FC6 i386.
> 
> Suggestions, even google terms would be helpful, thanks.

As discussed on the mythtv-users list, please get on the ivtv-users
list. The major changes in your FC4 vs FC6 setup is ivtv (and the v4l2
subsystem in the kernel, of course). Also make sure you're using the
recently released 0.8.1 driver from ivtv.
-- 
Axel.Thimm at ATrpms.net
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
Url : http://lists.atrpms.net/pipermail/atrpms-users/attachments/20061122/f1163013/attachment.bin