[ATrpms-users] ivtv / cx88xx issues after kernel upgrade

Thu Aug 10 13:49:27 CEST 2006

Help!

I recently did an apt-get dist-upgrade which pulled in a new kernel etc.

Was running kernel-2.6.12-1.1381_FC3, new kernel is kernel-2.6.12-2.3.legacy_FC3.

I have both an IVTV and DVB-T card in my system.

Was working fine before the kernel upgrade.

Now I am getting errors in dmesg and the dvb card wont work. If I uninstall the IVTV kmdl, the DVB card works fine on its own..

Have posted modprobe.conf below also - can anyone assist?

Thanks!

M.

Linux video capture interface: v1.00
bttv: Unknown symbol tveeprom_read
bttv: Unknown symbol tveeprom_hauppauge_analog
bt878: Unknown symbol bttv_read_gpio
bt878: Unknown symbol bttv_write_gpio
bt878: Unknown symbol bttv_gpio_enable
bttv: Unknown symbol tveeprom_read
bttv: Unknown symbol tveeprom_hauppauge_analog
ivtv:  ==================== START INIT IVTV ====================
ivtv:  version 0.4.6 (tagged release) loading
ivtv:  Linux version: 2.6.12-2.3.legacy_FC3 686 REGPARM 4KSTACKS gcc-3.4
ivtv:  In case of problems please include the debug info between
ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
ivtv:  any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected WinTV PVR 350 card (cx23415 based)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
ivtv0: Failed to load module tveeprom
ivtv0 warning: i2c client addr: 0x50 not found for command 0x0!
ivtv0: Error -19 reading Hauppauge eeprom.
ivtv0: Possible causes: the tveeprom module was not loaded, or
ivtv0: the eeprom kernel module was loaded before the tveeprom module.
tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
saa7115 1-0021: ivtv driver
saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21]
saa7127 1-0044: ivtv driver
saa7127 1-0044: saa7127 found @ 0x88 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=saa7127, addr=44]
msp3400 1-0040: ivtv driver
msp3400 1-0040: chip=MSP4418G-A2 +nicam +simple +simpler +radio mode=simpler
ivtv0: i2c attach to card #0 ok [client=MSP4418G-A2, addr=40]
msp3400 1-0040: msp34xxg daemon started
tda9887 1-0043: (ivtv) chip found @ 0x86 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43]
ivtv0: Could not detect tuner standard, defaulting to NTSC.
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: loaded v4l-cx2341x-dec.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02050032
ivtv0: Decoder revision: 0x02020023
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
ivtv0: Create encoder radio stream
ivtv0: Allocate DMA decoder MPEG stream: 16 x 65536 buffers (1024KB total)
ivtv0: Allocate DMA decoder VBI stream: 512 x 2048 buffers (1024KB total)
ivtv0: Create decoder VOUT stream
ivtv0: Allocate DMA decoder YUV stream: 24 x 43200 buffers (1024KB total)
ivtv0: loaded v4l-cx2341x-init.mpg firmware (155648 bytes)
spurious 8259A interrupt: IRQ7.
tuner: tuner type not set
ivtv0: Initialized WinTV PVR 350, card #0
ivtv:  ====================  END INIT IVTV  ====================

then later on..

bttv: Unknown symbol tveeprom_read
bttv: Unknown symbol tveeprom_hauppauge_analog
cx88xx: Unknown symbol tveeprom_read
cx88xx: Unknown symbol tveeprom_hauppauge_analog
cx8800: Unknown symbol cx88_reset
cx8800: Unknown symbol cx88_call_i2c_clients
cx8800: Unknown symbol cx88_wakeup
cx8800: Unknown symbol cx88_risc_stopper
cx8800: Unknown symbol cx88_print_irqbits
cx8800: Unknown symbol cx88_set_scale
cx8800: Unknown symbol cx88_shutdown
cx8800: Unknown symbol cx88_vdev_init
cx8800: Unknown symbol cx88_core_put
cx8800: Unknown symbol cx88_audio_thread
cx8800: Unknown symbol cx88_core_irq
cx8800: Unknown symbol cx88_core_get
cx8800: Unknown symbol cx88_get_stereo
cx8800: Unknown symbol cx88_set_tvnorm
cx8800: Unknown symbol cx88_vid_irqs
cx8800: Unknown symbol cx88_risc_buffer
cx8800: Unknown symbol cx88_set_stereo
cx8800: Unknown symbol cx88_sram_channels
cx8800: Unknown symbol cx88_set_tvaudio
cx8800: Unknown symbol cx88_sram_channel_dump
cx8800: Unknown symbol cx88_sram_channel_setup
cx8800: Unknown symbol cx88_print_ioctl
cx8800: Unknown symbol cx88_free_buffer
cx8800: Unknown symbol cx88_boards
cx8800: Unknown symbol cx88_newstation
lirc_i2c: chip found @ 0x18 (Hauppauge IR)
ivtv0: i2c attach to card #0 ok [client=Hauppauge IR, addr=18]
lirc_dev: lirc_register_plugin: sample_rate: 10
bttv: Unknown symbol tveeprom_read
bttv: Unknown symbol tveeprom_hauppauge_analog
bt878: Unknown symbol bttv_read_gpio
bt878: Unknown symbol bttv_write_gpio
bt878: Unknown symbol bttv_gpio_enable
dst: Unknown symbol bt878_device_control
dst_ca: Unknown symbol write_dst
dst_ca: Unknown symbol dst_pio_disable
dst_ca: Unknown symbol dst_comm_init
dst_ca: Unknown symbol read_dst
dst_ca: Unknown symbol dst_error_bailout
dst_ca: Unknown symbol dst_wait_dst_ready
dst_ca: Unknown symbol rdc_reset_state
dst_ca: Unknown symbol dst_error_recovery
dvb_bt8xx: Unknown symbol bt878_num
dvb_bt8xx: Unknown symbol bttv_sub_unregister
dvb_bt8xx: Unknown symbol dst_attach
dvb_bt8xx: Unknown symbol bttv_write_gpio
dvb_bt8xx: Unknown symbol bttv_sub_register
dvb_bt8xx: Unknown symbol bttv_get_pcidev
dvb_bt8xx: Unknown symbol dst_ca_attach
dvb_bt8xx: Unknown symbol bt878_start
dvb_bt8xx: Unknown symbol bttv_gpio_enable
dvb_bt8xx: Unknown symbol bt878_stop
dvb_bt8xx: Unknown symbol bt878

Modprobe.conf

alias usb-controller ehci-hcd
alias usb-controller1 uhci-hcd

# bttv
alias char-major-81-1 bttv
# dvb stuff
alias /dev/dvb/* /dev/dvb
# ivtv modules setup
alias char-major-81 ivtv
alias char-major-81-0 ivtv
options ivtv ivtv_debug=1 ivtv_pal=1 tuner=5
options tuner pal=1
options saa7127 enable_output=1 output_select=0 pal=1
options msp3400 once=1 simple=1
# lirc
alias char-major-61 lirc_i2c
alias lirc lirc_i2c
install lirc_i2c /sbin/modprobe ivtv; /sbin/modprobe --ignore-install lirc_i2c
# ivtv fb
#alias char-major-29-0 ivtv-fb
#alias fb1 ivtv-fb
#install ivtv /sbin/modprobe --ignore-install ivtv; /sbin/modprobe ivtv-fb
# SATA Stuff
# sound stuff
options snd-pcm-oss dsp_map=0 adsp_map=2
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
alias sound-service-1-0 snd-mixer-oss
alias sound-service-1-3 snd-pcm-oss
alias sound-service-1-12 snd-pcm-oss
alias eth0 e1000
alias snd-card-0 snd-cmipci
# Firewire
alias ieee1394-controller ohci1394
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF version 1.0.10rc3 ---
# --- END: Generated by ALSACONF, do not edit. ---
# nvidia kernel module
alias char-major-195 nvidia-1_0-8762
alias nvidia nvidia-1_0-8762

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.atrpms.net/pipermail/atrpms-users/attachments/20060810/3376911b/attachment.html 