[ATrpms-users] WinTV PVR 150 MCE
Rey Cruz
crxtasy_13 at sbcglobal.net
Fri Apr 28 11:01:28 CEST 2006
Hi,
I'm new to this list so if this was covered already I apologize. I'm
having a problem with my WinTv PVR 150 card that I just purchased. I can
get video and audio when using composite using cat /dev/video0 >
test.mpg and vlc. When I use the tuner 1 input, set to channel 3, I get
a black screen and static when using cat /dev/video0 > test.mpg and
vlc.
I am running Fedora Core 5 fully updated. I am only using the driver
from this repo tho. The tuner works in windows so I know it isn't a
hardware problem. I'm also using a vcr to send a signal to channel 3
when testing the tuner. I'm not sure if the nvidia module I'm using from
livna is messing with my setup
Any help would be appreciated,
Rey Cruz
http://www.ivtvdriver.org/index.php/Howto:Fedora
ivtv: no version for "struct_module" found: kernel tainted.
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.6.1 (development snapshot compiled on Sun Apr 23
18:34:42 2006) loading
ivtv: Linux version: 2.6.16-1.2096_FC5 SMP gcc-4.1
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
ACPI: PCI Interrupt 0000:05:06.0[A] -> Link [APC1] -> GSI 16 (level,
low) -> IRQ 21
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
tveeprom 5-0050: Hauppauge model 26582, rev F0B2, serial# 9445305
tveeprom 5-0050: tuner model is TCL M2523_5N_E (idx 112, type 4)
tveeprom 5-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 5-0050: audio processor is CX25843 (idx 37)
tveeprom 5-0050: decoder processor is CX25843 (idx 30)
tveeprom 5-0050: has no radio, has no IR remote
tuner 5-0061: chip found @ 0xc2 (ivtv i2c driver #0)
cx25840 5-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0)
cx25840 5-0044: loaded v4l-cx25840.fw firmware (13353 bytes)
wm8775 5-001b: chip found @ 0x36 (ivtv i2c driver #0)
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02040024
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB
total)
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB
total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB
total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB
total)
tuner 5-0061: tuner type not set
tuner 5-0061: tuner type not set
ivtv0: Initialized Hauppauge WinTV PVR-150, card #0
ivtv: ==================== END INIT IVTV ====================
$ ivtvctl -a
ioctl IVTV_IOC_G_CODEC ok
Codec parameters
aspect : 2
audio : 0x00e9
bframes : 3
bitrate_mode: 0
bitrate : 8000000
bitrate_peak: 9600000
dnr_mode : 0
dnr_spatial : 0
dnr_temporal: 8
dnr_type : 0
framerate : 0
framespergop: 15
gop_closure : 1
pulldown : 0
stream_type : 14
ioctl VIDIOC_G_FMT ok
Type : Video Capture
Width : 720
Height : 480
ioctl VIDIOC_QUERYCAP ok
Driver name : ivtv
Card type : Hauppauge WinTV PVR-150
Bus info : 0000:05:06.0
Driver version: 1537
Capabilities : 0x01030011
ioctl: VIDIOC_ENUMINPUT
Input : 0
Name : Tuner 1
Type : 0x00000001
Audioset: 0x00000007
Tuner : 0x00000000
Standard: 0x000000000000B000 ( NTSC )
Status : 0
Input : 1
Name : S-Video 1
Type : 0x00000002
Audioset: 0x00000007
Tuner : 0x00000000
Standard: 0x0000000000FFFFFF ( PAL NTSC SECAM )
Status : 0
Input : 2
Name : Composite 1
Type : 0x00000002
Audioset: 0x00000007
Tuner : 0x00000000
Standard: 0x0000000000FFFFFF ( PAL NTSC SECAM )
Status : 0
Input : 3
Name : S-Video 2
Type : 0x00000002
Audioset: 0x00000007
Tuner : 0x00000000
Standard: 0x0000000000FFFFFF ( PAL NTSC SECAM )
Status : 0
Input : 4
Name : Composite 2
Type : 0x00000002
Audioset: 0x00000007
Tuner : 0x00000000
Standard: 0x0000000000FFFFFF ( PAL NTSC SECAM )
Status : 0
ioctl VIDIOC_G_INPUT ok
Video input = 0
ioctl: VIDIOC_ENUMOUTPUT
ioctl VIDIOC_G_OUTPUT failed: Invalid argument
ioctl: VIDIOC_ENUMAUDIO
Input : 0
Name : Tuner 1
Input : 1
Name : Line In 1
Input : 2
Name : Line In 2
ioctl VIDIOC_G_AUDIO ok
Audio input = 0: Tuner 1
ioctl VIDIOC_G_FREQUENCY ok
Frequency = 1076
ioctl: VIDIOC_ENUMSTD
index : 0
ID : 0x000000000000000F
Name : PAL-BGH
Frame period: 1/25
Frame lines : 625
index : 1
ID : 0x00000000000000E0
Name : PAL-DK
Frame period: 1/25
Frame lines : 625
index : 2
ID : 0x0000000000000010
Name : PAL-I
Frame period: 1/25
Frame lines : 625
index : 3
ID : 0x0000000000000100
Name : PAL-M
Frame period: 1001/30000
Frame lines : 525
index : 4
ID : 0x0000000000000200
Name : PAL-N
Frame period: 1/25
Frame lines : 625
index : 5
ID : 0x0000000000000400
Name : PAL-Nc
Frame period: 1/25
Frame lines : 625
index : 6
ID : 0x00000000000D0000
Name : SECAM-BGH
Frame period: 1/25
Frame lines : 625
index : 7
ID : 0x0000000000320000
Name : SECAM-DK
Frame period: 1/25
Frame lines : 625
index : 8
ID : 0x0000000000400000
Name : SECAM-L
Frame period: 1/25
Frame lines : 625
index : 9
ID : 0x0000000000800000
Name : SECAM-L'
Frame period: 1/25
Frame lines : 625
index : 10
ID : 0x0000000000001000
Name : NTSC-M
Frame period: 1001/30000
Frame lines : 525
index : 11
ID : 0x0000000000002000
Name : NTSC-J
Frame period: 1001/30000
Frame lines : 525
index : 12
ID : 0x0000000000008000
Name : NTSC-K
Frame period: 1001/30000
Frame lines : 525
ioctl VIDIOC_G_STD ok
Video standard = 0x0000b000
ioctl: VIDIOC_QUERYCTRL
Brightness = 128
Contrast = 64
Saturation = 64
Hue = 0
Volume = 60928
Balance = 32768
Bass = 32768
Treble = 32768
Mute = 0
More information about the atrpms-users
mailing list