[ATrpms-users] Re: MPlayer & WMV9

[Joe]

Well before I started using ATrpms (and others) I had built MPlayer from 
source, and that's when it worked.  Ever since I started using the rpms 
then wmv9 stopped working, but videos encoded in any other supported 
codec work just fine.  But...now that you mention it...that was about 
the time I bought this new machine.  :-)  Unfortunately I don't have 
another machine readily available to try.  But after hours today or 
tomorrow, I'll run some Prime95 and MemTest+ on this machine...see if 
any problems crop up.

But I'm guessing from your response that wmv9 works just fine for you 
(and probably others)?

Thanks!

-joe



Axel Thimm wrote:

>On Wed, Jun 16, 2004 at 11:36:11AM -0400, Joe wrote:
>  
>
>>I've recently noticed that mplayer has stopped playing WMV9 files 
>>(Windows Media Video version 9).  Has anyone gotten these types of 
>>videos to work with the ATrpms MPlayer?  Any hints for a fix?  Below is 
>>the output from running mplayer at the command line.
>>
>>Playing ff20-lehre.wmv.
>>Cache fill: 16.45% (3448832 bytes)    ASF file format detected.
>>VIDEO:  [WMV3]  320x240  24bpp
>>=================================================
>>Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
>>AUDIO: 48000 Hz, 2 ch, 16 bit (0x10), ratio: 12008->192000 (96.1 kbit)
>>Selected audio codec: [ffwmav2] afm:ffmpeg (DivX audio v2 (ffmpeg))
>>==================================================
>>vo: X11 running at 1600x1200 with depth 24 and 32 bpp (":0" => local 
>>display)
>>Disabling DPMS
>>Opening video filter: [pp=hb/vb/dr/al/lb]
>>==================================================
>>Opening video decoder: [dmo] DMO video codecs
>>
>>
>>MPlayer interrupted by signal 11 in module: init_video_codec
>>- MPlayer crashed by bad usage of CPU/FPU/RAM.
>>    
>>
>
>This sounds like a hardware problem. When did it stop working? Did you
>test it on another machine?
>
>  
>
>> Recompile MPlayer with --enable-debug and make a 'gdb' backtrace and
>> disassembly. Details in 
>>DOCS/HTML/en/bugreports_what.html#bugreports_crash.
>>- MPlayer crashed. This shouldn't happen.
>> It can be a bug in the MPlayer code _or_ in your drivers _or_ in your
>> gcc version. If you think it's MPlayer's fault, please read
>> DOCS/HTML/en/bugreports.html and follow the instructions there. We 
>>can't and
>> won't help unless you provide this information when reporting a 
>>possible bug.
>>
>>
>>MPlayer interrupted by signal 11 in module: uninit_stream
>>Segmentation fault
>>    
>>
>
>  
>