[ATrpms-users] Re: Failed dependency after upgrading mplayer.

Glen Shadbolt shadbolt at umich.edu
Thu Apr 15 22:39:31 CEST 2004


Axel Thimm wrote:
> On Thu, Apr 15, 2004 at 03:50:19PM +0200, Tom Bjerck wrote:
> 
>>On 15. Apr 2004 14:57, Axel Thimm wrote:
>>
>>[...] 
>>
>>
>>>/usr/share/doc/nvidia-graphics4363-1.0_4363/README: 
>>>
>>>>Please note that the RIVA 128/128ZX chips are supported by the open
>>>>source 'nv' driver for XFree86, but not by the NVIDIA Accelerated
>>>>Linux Driver Set.
>>>
>>>So forget about my recommendation of using the full driver and revert
>>>back to the old XF86Config file (e.g. replace "nvidia" with "nv" and
>>>activate the "dri" module again).
>>>
>>>Sorry for the wrong advice! :(
>>
>>No problem, but I guess this means I can't use the mplayer package.
> 
> 
> No, you can, there were reports of people verifying it working even on
> Matrox and ATI cards (which is how it should be).
> 
> There are even updated nvidia-graphics-libs packages available that
> take care of the missing ldconfig.

I tried the fix posted earlier, and I have just tried the new packages. 
Both fixed the original problem. Now when I try to open a .avi I get 
audio but no video.

Here is the ouput I get:

[glen at localhost glen]$ mplayer foo.avi
MPlayer dev-CVS-040411-00:00-3.3.2 (C) 2000-2004 MPlayer Team

CPU: Advanced Micro Devices Athlon Thunderbird 1007 MHz (Family: 6, 
Stepping: 4)
Detected cache-line size is 64 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 0 SSE2: 0
Reading config file /etc/mplayer/mplayer.conf: No such file or directory
Reading config file /home/glen/.mplayer/config
Reading /home/glen/.mplayer/codecs.conf: Can't open 
'/home/glen/.mplayer/codecs.conf': No such file or directory
Reading /etc/mplayer/codecs.conf: Can't open '/etc/mplayer/codecs.conf': 
No such file or directory
Using built-in default codecs.conf.
font: can't open file: /home/glen/.mplayer/font/font.desc
Font /usr/share/mplayer/font/font.desc loaded successfully! (206 chars)
Linux RTC init error in ioctl (rtc_irqp_set 1024): Permission denied
Try adding "echo 1024 > /proc/sys/dev/rtc/max-user-freq" to your system 
startup scripts.
Using usleep() timing
Can't open input config file /home/glen/.mplayer/input.conf: No such 
file or directory
Can't open input config file /etc/mplayer/input.conf: No such file or 
directory
Falling back on default (hardcoded) input config
Opening joystick device /dev/input/js0
Can't open joystick device /dev/input/js0 : No such device
Can't init input joystick
Setting up LIRC support...
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support.
You will not be able to use your remote control.

Playing foo.avi.
AVI file format detected.
VIDEO:  [DIV3]  640x360  24bpp  23.976 fps  909.6 kbps (111.0 kbyte/s)
Clip info:
  Name:
  Subject:
  Artist: heroofmm
  Copyright:
  Comments:
  Software: Nandub v0.22
==========================================================================
Opening audio decoder: [liba52] AC3 decoding with liba52
Using 3DNowEx optimized IMDCT transform
AC3: 2.0 (dolby)  48000 Hz  192.0 kbit/s
Using MMX optimized resampler
AUDIO: 48000 Hz, 2 ch, 16 bit (0x10), ratio: 24000->192000 (192.0 kbit)
Selected audio codec: [a52] afm:liba52 (AC3-liba52)
==========================================================================
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffdivx] vfm:ffmpeg (FFmpeg DivX ;-) (MS MPEG-4 v3))
==========================================================================
Checking audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit...
AF_pre: af format: 2 bps, 2 ch, 48000 hz, little endian signed int
AF_pre: 48000Hz 2ch Signed 16-bit (Little-Endian)
AO: [oss] 48000Hz 2ch Signed 16-bit (Little-Endian) (2 bps)
Building audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit...
Starting playback...
VDec: vo config request - 640 x 360 (preferred csp: Planar YV12)
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is undefined - no prescaling applied.
No accelerated colorspace conversion found
SwScaler: using unscaled Planar YV12 -> RGB 32-bit special converter
VO: [ivtvosd] 640x360 => 640x360 RGB 32-bit
A:   1.8 V:   1.8 A-V: -0.022 ct:  0.020   44/ 44  29% 53%  2.0% 13 0 0%
A:   2.9 V:   3.0 A-V: -0.076 ct:  0.068   72/ 72  24% 51%  1.7% 23 0 0%



More information about the atrpms-users mailing list