[ATrpms-devel] Rebuilding Myth Bleeding Packages

[Axel Thimm]

On Fri, Feb 02, 2007 at 10:22:19PM -0500, John Welch wrote:
> OK, I'm trying to rebuild the myth packages and I'm running into a
> problem.  I have a question about the compile options, as well as one about
> what may be causing the rebuilt to fail.
> 
> First, as far as the compile options, when I ran the "rpmbuild" command kind
> of near the beginning of the process I saw a warning message scroll
> by.  When I look back at my log the exact message was "WARNING: If you plan
> to watch HDTV recordings you probably need to run ./configure with
> --enable-proc-opt".  I tried doing a little research on this option.  I
> couldn't find any information about what it actually does, but almost every
> document I found on building the Myth packages from source recommended that
> this option be used.  Just curious as to why you don't use it in your
> builds.  Since I do plan on watching HDTV recording it would seem like that
> at least for me I would want this option.

Packages that are intended for general use should not have a too
specific optimization. There is usually no significant loss of
performance using the normal rpm optflags.

> Now on to my rebuild problems.  The process goes through the
> mythtv-0.21directory and builds everything fine.  Then when it moves
> into the
> mythplugins-0.21 directory it fails almost immediately.  Below is the output
> leading up to the build process aborting:

I think the error must be earlier, e.g. there was no proper
installation of the headers. Please try using the builddir I
recommended, e.g. let it build under /var instead of under /usr.

> g++ -c -pipe -Wall -W -fomit-frame-pointer -D_REENTRANT -DPIC
> -fPIC  -D_GNU_SOURCE -DPREFIX=\"\" -D_FILE_OFFSET_BITS=64 -DQT_NO_DEBUG
> -DQT_THREAD_SUPPORT -DQT_PLUGIN -DQT_SHARED 
> -I/usr/lib/qt-3.3/mkspecs/default
> -I. -I/include -I/usr/kde/3.3/include -I/include
> -I/usr/src/redhat/BUILD/mythtv-suite-0.21/temp/usr/include
> -I/usr/src/redhat/BUILD/mythtv-suite-0.21/temp/usr/include/mythtv
> -I/include/mythtv/ffmpeg
> -I/usr/src/redhat/BUILD/mythtv-suite-0.21/temp/usr/include/mythtv/libmythtv
> -I/usr/lib/qt-3.3/include -o recordingselector.o recordingselector.cpp
> In file included from /include/mythtv/libmythtv/programinfo.h:4,
>                 from recordingselector.cpp:22:
> /include/mythtv/libmythtv/recordingtypes.h:4:21: error: mythexp.h: No such
> file or directory
> In file included from recordingselector.cpp:22:
> /include/mythtv/libmythtv/programinfo.h:5:23: error: mythdbcon.h: No such
> file or directory
> /include/mythtv/libmythtv/programinfo.h:372: error: 'MSqlBindings' has not
> been declared
> /include/mythtv/libmythtv/programinfo.h:374: error: 'MSqlBindings' has not
> been declared
> /include/mythtv/libmythtv/programinfo.h:381: error: 'MSqlBindings' has not
> been declared
> recordingselector.cpp: In member function 'void
> RecordingSelector::OKPressed()':
> recordingselector.cpp:315: error: 'MSqlQuery' was not declared in this scope
> recordingselector.cpp:315: error: expected `;' before 'query'
> recordingselector.cpp:316: error: 'query' was not declared in this scope
> recordingselector.cpp: In member function 'void
> RecordingSelector::updateSelectedList()':
> recordingselector.cpp:461: error: 'MSqlQuery' was not declared in this scope
> recordingselector.cpp:461: error: expected `;' before 'query'
> recordingselector.cpp:462: error: 'query' was not declared in this scope
> make[2]: *** [recordingselector.o] Error 1
> make[2]: Leaving directory `/usr/src/redhat/BUILD/mythtv-suite-0.21
> /mythplugins-0.21/mytharchive/mytharchive'
> make[1]: *** [sub-mytharchive] Error 2
> make[1]: Leaving directory `/usr/src/redhat/BUILD/mythtv-suite-0.21
> /mythplugins-0.21/mytharchive'
> make: *** [sub-mytharchive] Error 2
> error: Bad exit status from /var/tmp/rpm-tmp.83462 (%build)
> 
> 
> RPM build errors:
>    Bad exit status from /var/tmp/rpm-tmp.83462 (%build)
> [root at jrwent tmp]#
> 
> 
> One thing I noticed is that in the BUILD directory, in addition to the
> mythtv-0.21 and mythplugins-0.21 directories, I also see "temp" and "temp.."
> directories.  I don't know, maybe these are OK, but the "temp.." directory
> looks a little strange to me.
> 
> Hopefully I'm not making a silly mistake here in trying to rebuild these
> packages.  As I said in an earlier post, I've rebuilt .src packages before,
> but I'm not an expert on the process.
> 
> Any help would be greatly appreciated.
> 
> TIA,
> John

-- 
Axel.Thimm at ATrpms.net
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
Url : http://lists.atrpms.net/pipermail/atrpms-devel/attachments/20070203/f33b1935/attachment.bin